Hotline: 0908 287 626
SẢN PHẨM MỚI
HỆ THỐNG CỬA HÀNG
TIN TỨC
Hỗ trợ kỹ thuật
SE M-F3A FS
SE M-F3A FS

SE M-F3A FS

Mã sản phẩm: 1338
58,580,000₫
Giá tính trên đơn vị Cái

Mô tả sản phẩm

SE M-F3A FS

THE LONG AWAITED BASS EXTENSION

The M-F3A FS is the flyable bass extension module for the popular M-F3A PRO line array systems. Highly demanded, it employs two specially designed 6” x 9” woofers that in addition to high SPL, offer a slim and discreet design. The height is twice the size of one M-F3A PRO unit, complementing the system in every way.

The unit contains a newly designed 800 W Class-D power amplifier and is equipped with 24-bit/48 kHz DSP. By using the LCD screen and rotary encoder, users can control various system parameters such as delay, EQ, filters and more.

User’s configurations can then be saved as user presets. In addition, the built-in factory presets reduce setup times for existing M-Line systems in various configurations. In example, when flown with M-F3A PRO, the unit can deliver rich and deep bass to manage applications where no space for ground subs is available.

Improved rigging capabilities and the newly-designed extended bumper frame gives additional flexibility to integrate this adaptable subwoofer into M-Line systems.

M-F3A_FS

Two sets of woofers

Each M-F3A FS deliverrs a punchy and deep bass fundament. To minimize the size of the cabinet the efficiency was improved by the space-saving use of two arrays consisting of a dozen of aggregated smaller hight-tech bass loudspeakers at a whole.

Built-in DSP

Each M-F3A FS is equipped with 800W Class-D power amplifier with switching-mode power supply for minimum weight and maximum flexibility anywhere in the world. Additionally to that our 24bit/48kHz DSP processor provides signal filtering and ensures maximum driver protection with zero-failure rate.

EASE® Ready

AFMG® EASE® and EASE® Focus 3 GLL files are available for the whole M-F3A PRO family. This allows users to simulate and calculate various parameters such as audience coverage, SPL, frequency response, splay angles, delay times and more. Files are available in the Downloads section. 


EASE® and AFMG® are registered trademarks of AFMG Technologies GmbH.

 

Thông số kỹ thuật

Type: bass-reflex
Frequency Response (-3dB): 56 Hz - 250 Hz
Frequency Response (-6dB) 53 Hz - 350 Hz
Amplification: 800 W Class-D
Max. SPL (@1m): 127 dB /131 dB*
Dispersion (H x V): omnidirectional
Splay Angles: 0°, 1°, 2°, 3°, 4°, 5°, 6°, 8°
Transducers: 2 x 6 by 9" woofers
Power Amplifier Type: Class-D, SMPS
Sensitivity: 93 dB
DSP: 48 kHz, 24-bit DSP processor with eXtended dynamics,
processing latency: 1.1 ms
Protection: short-circuit, over-temperature, over-current
Controls: On/Off switch, Sub Level, LP Filter (80 Hz - 250 Hz)
Indicators: Protect, Limit, Signal, Power On
Audio Connectors: XLR 3-pin female line-level input, XLR 3-pin male signal link
Power Connectors: Neutrik PowerCon type A power input, type B power link (MAX: 15A, Maximum 6 pcs per line)
Rigging: 4-point rigging, 4x standard SE 6mm rigging pins
Power Requirements: 100 - 120 VAC or 220 - 240 VAC
Cabinet: plywood, black or white polyurea coating
Dimensions (W x H x D) : 265 x 651 x 430 mm
Weight: 23 kg
Ý kiến bạn đọc